Generate a perfectly fitted, 3D-printable case for your Adafruit VL53L0X Time-of-Flight Sensor Adafruit Breakout. Verified 18x13mm base dimensions with Tiny board (18x13x2mm); above-board dominated by header; forward-face clearance is the critical dimension, not above/below.
Time-of-flight sensor draws ~19mA — no thermal concern. The critical enclosure requirement is the 940nm laser aperture must be unobstructed by the enclosure wall.
PLA works for bench prototypes and indoor installations. PETG tolerates moderate environmental exposure and is preferred when the sensor is aimed outdoors. ABS suits integration into larger mechanical assemblies via solvent welding.
Laser aperture cutout MUST be at least 5mm diameter and aligned within 0.5mm of the optical package centerline — misalignment causes near-field clipping.
No transparent cover — even clear acrylic or PETG plate introduces parasitic reflections and reduces range by 30-50%.
Ambient IR interference affects accuracy: direct sunlight or strong IR sources should not fall on the aperture.
XSHUT pin is used for I2C address reconfiguration in multi-sensor setups — leave accessible if multiple VL53L0X share a bus.
Don't waste time with generic STL files that don't fit. Generate a custom, parametric enclosure designed exactly for your VL53L0X Time-of-Flight Sensor Adafruit Breakout hardware.
Generate your enclosure now — it's freeJoin 1,000+ makers using AI-powered CAD.
Mechanical properties are estimates. Validate critical loads before use.