Generate a perfectly fitted, 3D-printable case for your PJRC Teensy 4.1. Verified 60.96x17.78mm base dimensions with Above-board for pin headers; below-board for solder + SDIO card if used.
Teensy 4.1 ARM Cortex-M7 @ 600MHz dissipates up to 500mW under heavy DSP load; the larger board footprint and Ethernet capability lead to sustained workloads that benefit from modest airflow.
Teensy targets DSP, audio, and performance-critical embedded work. PETG is default. ABS extends thermal headroom for sustained DSP workloads. PC for industrial or automotive DSP deployments.
Micro-USB is the ONLY programming path — no bootloader button; programming happens via Teensy Loader over USB.
MicroSD slot (Teensy 4.1) on underside — reserve below-board access if using.
Ethernet magjack (Teensy 4.1) — tall port (~14mm above board); add clearance.
Audio Adaptor board stacks under Teensy — provide below-board clearance if used.
Teensy has NO wireless — no antenna keepout.
Do NOT apply pressure to the top surface — bare MCU is underneath with no shield can.
Don't waste time with generic STL files that don't fit. Generate a custom, parametric enclosure designed exactly for your Teensy 4.1 hardware.
Generate your enclosure now — it's freeJoin 1,000+ makers using AI-powered CAD.
Mechanical properties are estimates. Validate critical loads before use.