Generate a perfectly fitted, 3D-printable case for your Google Google Coral Dev Board. Verified 88x60mm base dimensions with Above-board dominated by the integrated TPU heatsink+fan assembly (~20mm stack).
Google Edge TPU coprocessor + Mediatek MT8167 host SoC together dissipate 3-5W during inference; passive convection through an open-top or vented-side enclosure is adequate. Sealed enclosures approach the TPU's 85°C junction limit under sustained load.
PETG handles 40-50°C internal enclosure temperatures without creep and is the default for the Coral's edge-inference workloads. ABS is preferred for industrial vision installations where mechanical rigidity and chemical resistance matter. PC provides the highest thermal headroom for 24/7 inference nodes.
TPU heatsink fan is small (~20mm) and low-static-pressure — a sealed enclosure will throttle it; minimum two vent slits required.
40-pin GPIO header is mechanically compatible with Pi HATs but not electrically identical — do not assume HAT fit implies function.
USB-C data port is the primary flashing path — MUST remain accessible or expose via a USB-C extension cable.
MicroSD slot on underside — consider a bottom cutout for field-serviceable cards.
Don't waste time with generic STL files that don't fit. Generate a custom, parametric enclosure designed exactly for your Google Coral Dev Board hardware.
Generate your enclosure now — it's freeJoin 1,000+ makers using AI-powered CAD.
Mechanical properties are estimates. Validate critical loads before use.